24小时服务热线： 15677114556 18978820229
D2×2BA Optical Switch
Application
●Metropolitan Area Network
●R&D in Laboratory
●System Monitoring
●Configurable OADM
Route States
Dimensions
Parameters | Unit | OSW-D2×2BA |
Wavelength Range | nm | 650～1310 | 1260～1670 |
Testing Wavelength | nm | 650/780/850/980/1064/1310 | 1310/1490/1550/1625/1650 |
Insertion Loss | dB | Typ:1.0,Max:1.2 | Typ:0.8,Max:1.2 |
Return Loss | dB | ≥30 | ≥50 |
Crosstalk | dB | ≥35 | ≥50 |
PDL | dB | ≤0.05 |
WDL | dB | ≤0.25 |
TDL | dB | ≤0.25 |
Repeatability | dB | ≤±0.02 |
Power supply | v | 3.0 or 5.0 |
Lifetime | Cycle | ≥107 |
Switch Time | ms | ≤8 |
Transmission Power | mW | ≤500 |
Operation Temperature | ℃ | -40～+85 |
Storage Temperature | ℃ | -40～+85 |
Weight | g | 16 |
Dimension | mm | (L)55×(W)30×(H)12.8(±0.2) |
Pins
D2×2BA | Optical Path | Electric Drive | Sensor Status |
Pin 1 | Pin 2 | Pin3- Pin4 |
Non- Latching | P1-P3(P1’-P3’) | GND | GND | OPEN |
P1-P4 P2-P3 (P1’-P4’ P2’-P3’) | V+ | GND | CLOSE |
D2×2BA | Optical Path | Electric Drive |
PIN1 | PIN2 | Pin3 | Pin4 |
Latching | P1-P3(P1’-P3’) | V+ | GND | -- | -- |
P1-P4 P2-P3 (P1’-P4’ P2’-P3’) | -- | -- | GND | V+ |
Electrical parameters
| Voltage | current | Resistor |
5V Latching | 4.5~5.5 | 36~44mA | 125Ω |
5V Non-Latching | 4.5~5.5 | 26~32mA | 175Ω |
3V Latching | 2.7~3.3 | 54~66mA | 50Ω |
3V Non-Latching | 2.7~3.3 | 39~47mA | 70Ω |
Ordering Information：OSW－D2×2BA－A－B－C－D－E－F－G
A | B | C | D | E | F | G |
Mode | Wavelength | Voltage | Control Model | Fiber Diameter | Fiber Length | Connector |
SM:9/125um M5: 50/125um M6: 62.5/125um | 85: 850nm 13: 1310nm 14: 1490nm 15: 1550nm 162: 1625nm 165: 1650nm 13/15:1310/1550nm | 3: 3V 5: 5V | L: Latching N:Non-Latching | 25:250um 90:900um 20:2.0mm
| 05:0.5m 10:1.0m 15:1.5m | OO: None FP: FC/PC FA: FC/APC SP: SC/PC SA: SC/APC LP: LC/PC LA: LC/APC |
